Lay Out the Structure That Holds Everything Else

Framing in Floresville for new construction and additions requiring accurate, code-aligned structural support

JDR Construction provides structural framing for new builds, room additions, and remodeling projects across Floresville, San Antonio, Lavernia, Elmendorf, Helotes, and Lytle. You need framing when constructing a new building, adding square footage, or opening walls during a remodel that requires reconfiguring load paths. Framing creates the skeleton of the structure, defining room layout, supporting roof and floor loads, and providing attachment points for all finish materials.

The work involves cutting, assembling, and securing dimensional lumber or engineered beams according to structural plans. Wall plates are laid out, studs are spaced to code, headers are sized for openings, and everything is plumbed, squared, and braced before sheathing or drywall is applied. Framing must account for door and window locations, plumbing and electrical runs, insulation depth, and finish material thickness. Each connection and member size is determined by load requirements and span tables.



If you are planning new construction or an addition that requires structural framing, get a framing quote to review the scope and material requirements.

Framing begins with marking the foundation or floor deck to establish wall locations, then cutting and assembling wall sections on the ground before tilting them into place. You will see circular saws, framing nailers, speed squares, chalk lines, and levels used throughout the process. Headers are built with multiple members and shims to fit openings, and studs are placed at sixteen or twenty-four inches on center depending on load and finish requirements. Corners are built with multiple studs to provide nailing surfaces, and blocking is added where needed for shear resistance or fixture attachment.

Once framing is complete, you will notice straight walls, square corners, level ceiling joists, and openings that match door and window sizes without gaps or forced fits. The structure will feel solid underfoot, and walls will not rack or flex when pushed. JDR Construction ensures that all framing meets local building codes and provides reliable support for the loads and finishes planned for the project.



Framing services do not include sheathing, insulation, or finish carpentry unless specified. Electrical and plumbing rough-in typically follows framing and must be coordinated to avoid conflicts with structural members. Material delivery must be scheduled to match the framing timeline and site access conditions.

How Framing Sets the Stage for the Rest of Construction

Framing is the most critical phase of structural work, and understanding what happens during this stage helps you recognize quality and avoid problems later.

What does it mean when framing is described as sixteen inches on center?

Studs are spaced so their centers are exactly sixteen inches apart, providing consistent support and nailing surfaces for drywall, sheathing, or siding. This spacing is standard for most residential walls and ensures that sheet materials land on framing without cutting or waste.

How are headers sized for door and window openings?

Header size depends on the width of the opening and the load above, including roof weight, upper floors, or point loads from beams. Structural plans specify header dimensions, and building inspectors verify that installed headers match the design before allowing work to continue.

Why must walls be plumb and square during framing?

Out-of-plumb walls cause finish materials to gap or tilt, doors to swing open or closed on their own, and trim to require excessive shimming or scribing. Squaring corners ensures that rooms are rectangular, which affects flooring installation, cabinetry fit, and overall appearance.

When can framing be inspected and approved?

Most jurisdictions require a framing inspection before insulation or sheathing covers the structure. The inspector verifies stud spacing, header size, bracing, and connection methods to confirm compliance with building codes and structural plans.

What should you look for when evaluating completed framing?

Walk through the structure and check that walls are straight, corners are square, openings are properly sized, and there is no excessive bowing or twisting in studs. Headers should be level, floor joists should not bounce excessively, and all connections should be nailed or screwed as required by code.

JDR Construction frames new construction and additions with attention to layout accuracy and structural performance, ensuring code compliance and long-term reliability. Get a framing quote to review your project and confirm the structural plan.